dust collector(bag filter air filter,dust filter,pulse jet fabric filter)

1.dust filter is Cylinder cartridge 2.Safety valve on top of collector 3.filter bag inside the filter

XC-GDM pulsedust filter for blast furnace gas.

The successful development of a new filtration media with superb heat resistance and the application of pulse bag type collector to blast furnace gas ensure the exhaust concentration of blast furnace gas <5mg/m3 N, achieving the best dedusting effect.

Features of blast furnace pulse dust collector:

1.       Cylinder cartridge

2.       Safety valve on top of collector

3.       Dust stock under the dust discharge device

4.       Pulse de-dusting , inert gas(nitrogen, oxygen) is adopted for pressure

5.       Long bag and low pulse is adopted

Major technical parameters of dust collector with single cartridge

Dust collector model	XC-GDM-3200	XC-GDM-3400	XC-GMD-3600	XC-GMD-3800	XC-GMD-4000	XC-GMD-4200
Internal diameter of cylinder (mm)	3200	3400	3600	3800	4000	4200
Treating wind volume (m3/h)	14112-18816	16416-21888	17820-23760	19764-26352	20638-27504	22932-30576
Filtration area (m2)	392	456	495	549	573	637
Filtration wind speed (m/min)	0.6-0.8
Bag specification (mm)	Φ130*6000
Qty of bags (pcs)	160	186	202	224	234	260
Pulse valve specification	3
Qty of pulse valve	12	13	14	15	15	16
Pulse width (s)	0.1-0.2
Blowing pressure (Mpa)	0.15-0.25
Equipment resistance (Pa)	≤2000
Dust concentration at the inlet (g/m3N)	10-15
Dust concentration at the outlet (mg/m3N)	<10
Equipment mass (T)	15.6	18.3	22.3	25.2	29.3	35.1
Dust holder volume (m3)	3.5	3.5	4.0	4.0	4.0	4.0

dust collector(bag filter air filter,dust filter,pulse jet fabric filter)